Immunoassay of P-glycoprotein on single cell by capillary electrophoresis with laser induced fluorescence detection

The cellular mechanism based on P-glycoprotein (PGP) for its drug pump function has become very important in multidrug resistance (MDR) research. A method has been established to characterize PGP on single K562 cell by coupling capillary electrophoresis with laser induced fluorescence detection. A permeable intact cell after the immunoassay binding with fluorescence labeling antibody was injected into the capillary and directly separated without lysis. It was found that once 5-10 optional cells were detected in batch, the PGP amount on this cell line could be outlined and calculated clearly. The PGP amount on K562 MDR cell line is 3.88 times higher than that on K562 sensitive cell line. These two cell lines with immunoassay binding were also analyzed by injection of multi-cells in order to improve the throughput. A resistance factor so called multidrug resistance multiple (MRM) was introduced to evaluate the MDR difference between cell lines. The MRM values of the cell line K562 measured by single cell analysis are well correlated with those by flow cytometry, which also prove the validity of our method in single cell analysis for the possibility of cancer diagnosis, pharmacokinetics and drug screening in future.     

Ionization of aqueous toluic acids: Conductance and thermodynamics

Conductivities of aqueous solutions ofortho-, meta-, andpara-toluic acids have been measured for the concentration range 0.1–2 millimolar and at 5° intervals from 5 to 100°C. At each temperature pK _a(m) andA ₀ have been calculated using the paired ion model recently described by Fuoss. Thermodynamic parameters have been calculated for the ionization of each acid, and Walden products for the anions. Results are discussed in terms of contributions to acidity by enthalpy and entropy changes as well as by hydration of the various solute species.     

纳米级碳导电剂的种类对licoo2电化学性能的影响

碳纳米管;锂离子电池;正极;倍率容量;导电剂     

Low-temperature Heat Capacities and Thermodynamic Properties of Hydrated Sodium Cupric Arsenate [ NaCuAsO4·1.5H2O(s)]

Low-temperature heat capacities of the solid compound NaCuAsO4 · 1.5H2O(s) were measured using a precision automated adiabatic calorimeter over a temperature range of T = 78 K to T = 390 K. A dehydration process occurred in the temperature range of T = 368-374 K. The peak temperature of the dehydration was observed to be TD = (371.828±0.146) K by means of the heat-capacity measurement. The molar enthalpy and entropy of the dehyperimental values of heat capacities for the solid(Ⅰ) and the solid-liquid mixture(Ⅱ) were respectively fitted to two polynomial equations by the least square method. The smoothed values of the molar heat capacities and the fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were tabulated at an interval of 5 K.     

水-乙醇二元体系共沸混合物的热力学研究

用全自动低温绝热量热计测定了水、乙醇以及水和乙醇组成的共沸混合物在不同温区的摩尔热容Cp,m. 建立了共沸混合物Cp,m与温度T的函数关系.结果表明,水和乙醇组成的共沸混合物在98.496 K发生玻璃态转化,在158.939 K 和270.95 K发生固-液相变.获得了其相应的相变焓和相变熵.计算了以298.15 K为基准的该共沸混合物的热力学函数和超额热力学函数.     

光固化环氧丙烯酸酯/SiO2杂化材料的研究

用FTIR、SEM、DSC和TGA表征了光固化环氧丙烯酸酯／SiO2杂化材料[(EA-TMSPM)／SiO2]，研究了盐酸、γ-甲基丙烯酰氧丙基三甲氧基硅烷(TMSPM)和无机物浓度对(EA-TMSPM)／SiO2结构与性能的影响。结果表明，无机物浓度高的(EA-TMSPM)／SiO2杂化体系中SiO2粒子尺寸略大于无机物浓度低的体系；盐酸和无机物浓度的增加，都可以增强杂化材料的耐磨性。     

龋病人牙釉质表面硬度及抗磨损性能测试

采用人工方法制成人牙釉质浅龋及使用抗龋措施的龋损釉质样本，分别测量各组釉质表面显微硬度，并以微动摩擦磨损试验机测试其抗磨性能，试验结果表明：各组实验组釉质较对照组表面硬度都有不同程度下降，氟化钠前处理会使釉质表达硬度显著下降，人工浅龋牙釉质的抗磨损性能不如正常釉质，使用两种抗龋措施对其抗磨性能没有明显改善。     

Structure and Electrochemical Behavior of Lithium-Manganese Spinels Doped with Chromium and Nickel

A series of compounds with the general formula LiMn_{2 - x - y} Cr _x Ni _y O₄, where x + y = 0.05, 0.5, or 1.0, is synthesized. It is shown that all these compounds are pure-phase spinels with parameter aequal to 0.8193-0.8236 nm. Doping a stoichiometric lithium-manganese spinel simultaneously with chromium and nickel makes the spinel structure stable. The initial specific capacity of a spinel depends on its doping degree. Doping LiMn₂O₄ with chromium and nickel simultaneously at an Mn : Cr : Ni ratio of 195 : 3 : 2 raises the spinel's specific capacity and reduces the cycling degradation. The change in the discharge capacity of LiMn_1.95Cr_0.03Ni_0.02O₄ electrodes cycled at 20, 0, and -14°C is determined.     

计算金属间化合物热力学性质的新方法

用一简单的相关函数式对金属间化合物的热力学性质进行拟合，提出了一种计算金属间化合物热力学性质的新方法，并用此方法计算了二元金属间化合物的常温热容和熵。计算结果表明，该方法简单，且能满足一定的计算精度，有一定的实用价值。     

Dependence of Performance of Organic Light-emitting Devices on Sheet Resistance of Indium-tin-oxide Anodes

IntroductionIndium-tin-oxide(ITO) has been widely used asthe anode material in organic light-emitting devices(OLEDs) because of its high transmittance in the visi-ble region and low electrical resistivity. In the pastyears, many investigations focused on …